Ghost 2 Immobiliser
Ghost is an wireless security system that safeguards your car from key-cloning and hacking. It is connected to the ECU unit through the CAN data networks. It is also silent, meaning it cannot be detected.
You can only disable it by pressing a button sequence (like PIN code) you have programmed into your car by using buttons on the steering wheel as well as the centre console.
Guards Your Car from Theft
With car theft on the rise and cars being stolen in mere seconds, it is important that every car owner think about the additional security options available to them. Immobilisers are among the most reliable and well-established methods to keep your car safe. Ghost immobilisers are a great option because they are small, hidden within the wires of your vehicle, and do not emit any radio frequency signals. They are therefore untraceable and can be fitted without having an impact on the CAN bus system in your vehicle.
Contrary to other immobilisers which rely on tags, keypad input or the exact sequence of buttons to disarm them, our ghost immobiliser near me can only be disabled with the exact pin code that was created by us at the time of installation. This unique sequence of disarming uses the buttons that are already in your vehicle such as those on your steering wheel, doors or central console to prevent anyone from starting and driving your car away. This stops thieves from copying your key or using a jamming/spoofing device that can disable the standard immobilisers for cars.
Not only will a ghost immobiliser block your vehicle from being driven however it also prevents the car from being smashed for parts. This is a rising issue in the UK due to the growing popularity of these kinds of cars. It can happen in a minute. ghost 2 immobiliser fitting near me from TTW can be easily programmed to shield your vehicle from these kinds of attacks.
If you have our ghost 2 immobiliser in my area it will prevent your vehicle from being stolen from a service station or even if it is being driven by an employee when your car is on the lift at the garage. This is because the Ghost can be put into Service/Valet mode, and will only allow a specific button sequence to be entered by our customers.
Contact us today if want to know more about our Ghost immobilisers or if you would like a no-cost estimate. We will be happy to assist you and provide you with peace of mind that your vehicle is secured at all times.
No Key Fobs or LED Indications To Give Away Its Location
Secure your vehicle from the latest type of theft by using this non-detectable immobiliser which is integrated into your cars CAN data network. Contrary to other aftermarket CAN immobilisers, Ghost does not rely on key fobs or LED indicators for its operation. Instead, it makes use of buttons found in the standard factory controls that are already in your vehicle, such as the ones on the steering wheel, door panels and centre console. This generates a secret code that needs to be entered in order to start your vehicle, which makes it difficult for thieves to track.
The CAN-BUS immobiliser developers have also added additional security methods to protect the device from being hacked or bypassed. It also offers CAN-BUS blocking and a physical immobiliser cut, which means that even if your keys are stolen, the thief will be unable to drive away with your joy and pride.
Installing the CAN-BUS in your vehicle is a simple and easy procedure that takes just 30 minutes. We will have someone from our team in your area to arrange the time and place that works for you. After your vehicle is fitted and registered, you will receive an registration code as well as unique security codes that you can use on your mobile and app. This will make it easier for you to use and will give you complete control over the safety of your vehicle.
The system can be installed on most modern vehicles but should you own a special or antique car, please get in touch to find out if it's compatible. The supply and installation price of the Ghost Immobiliser 2 is APS449 and your car will be added to the International Security Register if fitted by one of our approved installers. If you have any queries, don't hesitate to contact us with our helpful staff. We're looking forward to hearing from you.
Easy to Setup and Programming
Modern cars are usually fitted with immobilisers that stop thieves from hot-wiring or stealing your vehicle. Contrary to physical deterrents such as locking your steering wheel or wheel clamps an immobiliser is covertly integrated within your vehicle making it virtually impossible to find and defeat.
The unit connects directly to the CAN data network of your vehicle. It stops it from starting until you enter a unique code. The unit is compact and sealed, meaning it can be put in any place within your vehicle without any additional wiring. It doesn't also emit radio frequency signals, so it cannot be identified by RF scanning or code grabbing equipment used by thieves.
Ghost makes use of the buttons on your steering wheel, door panels, and the central console of your vehicle to create a customized (like a pin code) disarm sequence that has to be entered to start your car. The pin code sequence is built around the number of button presses from 4 to 21 and is easily changeable in the event of need. You can also put the vehicle in Service/Valet Mode, so that it can still be operated but will not be able to start or drive. This will keep your car safe when you bring it in for service or valet parking and ensure that the mechanic isn't able to access your pin code in order to deactivate your system.
You can make use of our app to create an interim pin for your ghost device if you're planning to be away from your vehicle for a long period of time such as working or vacation. You can also enter your pin code manually whenever you want to drive the vehicle.
Our CAN bus immobiliser can also be compatible with a remote keyfob and tracker. (Brand dependent) This gives priority to the ghost system. This is great for extra security in the case your vehicle gets stolen or if you lose your keys.
Contact us today to learn how we can help protect your vehicle from key-cloning or hacking. We provide our services throughout the UK as well as in our specially-designed installation centre in Derby.
Service/Valet Mode
Modern automobiles have sophisticated stop/start eco systems that require the proper inputs to function correctly eg battery voltage as well as engine temperature, external temperatures, and which electrical systems are active. They can cause issues, and it can be difficult to determine if the issue is due to Ghost or not. This is particularly the case if your car has been recently repaired or valet-parked. You can use the ghost service mode to allow the vehicle to start and drive temporarily without the need for a pin code. This is helpful when your car is being serviced by an independent garage or valet-parked.
Press the service button five times to enter service mode. The indicator signal will flash twice to indicate that service mode is entered. You can exit the mode at any time by entering a PIN code. Once you exit the service mode, the Ghost immobiliser returns to normal operation.
It is a discrete system that communicates with the vehicle ECU through the CAN data circuit. It connects directly to the original buttons of the vehicle and does not use radio frequency signals, as do other immobilisers. This makes it near impossible for any other device to hack or bypass or jam devices that mimic codes from an original key fob are not a problem for this system.
It is a TASSA-certified anti-theft device that meets the highest protection standards. It has a unique marking system that links to the security registry of the world, which is a requirement for insurance companies.
The ghost immobiliser is a compact device that can be easily hidden in the wiring of your vehicle's factory. This makes it almost impossible for thieves. It is a sealed device that is so small that it can be installed in a variety of different areas of the vehicle, such as under the dashboard or on the steering wheel.
The system makes use of the existing buttons within your vehicle (such as the ones on your steering wheel doors, door panels or the center console) to allow you to make a unique and changeable disarm sequence up to 20 presses in length that must be entered prior to when your vehicle starts. Anyone who has your unique pin code is able to enter it, so your family members, your friends or colleagues can utilize it.